|
Up
Baghouse Wear Parts
Drum/Dryer Flights
Elevator Buckets
Pugmill Wear Parts
Silo Cone Liners
Slat Conveyor Floor
Slat End Protectors
| |
|
General Information: Kenco Engineering
offers fabricated steel elevator buckets with exclusive
tungsten carbide impregnated
wear lips for all extreme service applications. Kenco elevator buckets are custom made, and are continuous welded inside and outside.
Tungsten Carbide impregnated front wear lips and side cutters provide maximum life on critical wear surfaces.
Optional clean-up lips, which project an extra 1/2 inch, can be utilized to help prevent material from accumulating and hardening at the bottom of the elevator column.
Download product literature (PDF).
|
|
 |
Features and Benefits:
 | Exclusive tungsten carbide impregnated wear lips greatly extend bucket wearlife |
| Fabricated steel buckets are continuous welded inside and outside |
| Tungsten carbide impregnated wear lips can be installed or replaced in the field |
| Fewer replacements of worn elevator buckets eliminates tedious, unpleasant labor |
| Optional clean-up lips project an extra 1/2 inch to help prevent material build up |
| Custom manufactured to exact job requirements |
FAQ's:
How can material buildup at the bottom of the elevator column be avoided?
Design your elevator bucket line so that every third or fourth bucket is a clean-up bucket.
Kenco Tungsten Carbide impregnated clean-up bucket lips project an extra
1/2 inch beyond the normal lip projection. The clean-up lips insure that loose material does not pack or harden at the bottom of the elevator column, a major factor in bucket wear.
|
