Kenco Engineering Inc. Solving Wear Problems Since 1957 Member of:

Auger Shoes

 

Up
Auger Shoes
Paver Floors
Screed Plates
Windrow Elevator Blades
Windrow Elevator Floor

General Information:

Kenco Auger Shoes bolt over base auger flights, virtually eliminating wear to the base auger.  Should the Auger Shoes ever wear out, simply remove them and bolt on new shoes.  Kenco Shaft Shields fit over the auger tube to protect it from abrasive wear. They are installed by plug welding and can be torch cut, if necessary.

 

                            

Features and Benefits:

bulletReplace worn auger shoes only, not the entire auger
bulletAuger shoes are cast standard to 550 Brinell, optionally to 700 Brinell
bulletBolt-on style auger shoes offer easy replacement
bulletShaft shields are formed and heat treated to hardness in excess of 60 Rockwell C
bulletAvailable for most popular diameter and pitch augers

 

FAQ's:

Can a worn auger be rebuilt using Kenco Auger Shoes?

If most of the original diameter still remains, an auger can be rebuilt by bolting on Kenco Auger Shoes.  However, it is preferable to immediately protect a new base auger with Kenco Auger Shoes and Shaft Shields.  This may allow the base auger to last for the entire service life of the plant or machinery in which it operates.

 

Does Kenco manufacture complete auger assemblies?

Yes.  For augers with severe tube wear, or when access to the auger is difficult or costly, consider Kenco Modular Augers.  For augers in mild wear environments, see Kenco Wear Resistant Augers.

 
Copyright © 1999-2008  Kenco Engineering Inc.