Kenco Engineering Inc. Solving Wear Problems Since 1957 Member of:

Slat Conveyor Floor

 

Up
Baghouse Wear Parts
Drum/Dryer Flights
Elevator Buckets
Pugmill Wear Parts
Silo Cone Liners
Slat Conveyor Floor
Slat End Protectors

General Information:

Kenco Engineering Slat Conveyor Liners are offered in several easy to manage sizes that are light weight enough to be safely installed without heavy lifting equipment.  Holes are cast in place for fast, easy bolt-on or weld-on installation.  Kenco Slat Conveyor Liners are cast from 550 Brinell hardness Kenco Alloy-K for maximum abrasion resistance.  For very extreme applications, Alloy-K is optionally available in 700 Brinell hardness.  See Kenco Slat Conveyor Warranty.

  

 

Features and Benefits:  

bulletBest warranty in the industry
bulletCan be safely installed without heavy lifting equipment
bulletHoles are cast in place for fast, easy bolt-on or weld-on installation
bulletCast from 550 Brinell hardness Kenco Alloy-K
bulletOptionally available in 700 Brinell hardness for extreme applications

 

FAQ's:

Can Kenco Slat Conveyor Liners be cut?

Yes.  A plasma cutter is recommended for cutting Slat Conveyor Liners, but an abrasive cutoff saw will also work.  Kenco can plasma cut all Slat Conveyor Liners in our factory.

 

Can Kenco Slat Conveyor Liners be welded?

No, the alloys in Kenco Slat Conveyor Liners are not suitable for welding.  For weld-on installation use Kenco cone-shaped weld washers.  Simply insert the proper size weld washer in the casting holes and arc weld to the sub-floor. 

 
Copyright © 1999-2008  Kenco Engineering Inc.